장점
- Depth profile
- 모든 종류의 원소, 동위 원소 검출 가능
- ppb까지 분석
이온 영상 mapping, line scanning 가능
단점
분석시 많은 시간과 돈이 소요됨
시료 파괴
- 반도체 doping profiling
- 표면 원소의 규명
- 금속 재료의 불순물 비교조사
- 고분자 화합물의 조성
600V 2종 비닐 절연전선(HIV)의 과
1. 이론 및 원리
1.1. 크로마토그래피
1.1.1. 크로마토그래피의 정의 1-[1]
크로마토그래피(chromatography)란 다공성 흡착제 입자를 일정한 길이만큼 충전시킨 관(column)에 용질이 들어 있는 혼합물을 통과시켜 흡착제 입자에 대한 용질의 흡착 특성 차이에 근거하여 분리하는 방법이다. 즉, 시간이 지나
X선 결정학과 NMR은 해상력을 원자수준까지 끌어올렸다. 물리학 기술을 분자생물학 분야에 가장 창의적으로 사용한 경우가 바로 X선 결정학일 것이다. 하지만, 시료의 상태가 단결정 상태이기 때문에 실제 구조와 차이를 보일 수 있고, 분자의 Dynamics를 관찰이 불가능하다는 단점이 있다. 반면, NMR 기법은
1.개요
1) 원리
시료를 이온화 시킨 후 시료의 분자 이온이나 분자의 조각이온을 질량/전 하수(m/z비)에 따라 분리하여 독특한 패턴의 질량스펙트럼(mass spectrum)을 얻고 이 스펙트럼의 해석에 의해 물질의 정성(스펙트럼의 위 치) 및 정량(강도)분석을 행한다.
2) 특징
(1)유기 화합물의 경
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
Ion ImplantationIonized dopant atoms are physically forced into the silicon crystal by accelerating them through high potentials (3 kV- 3 MV) toward the silicon wafer.
– Mass separator allows each implanter to run multiple
processes (B, P, BF2, As...)
– Low temperature (room temperature ~200 °C)
• can use photoresist as a mask
– Needs to be followed by an anneal
1. GROIN MASS
Visualize the anatomy of the groin. There are skin, subcutaneous tissue, and the inguinal and femoral canals; underneath these are the saphenous and femoral veins, the femoral artery and nerve, and lymph nodes. In the next layer are the psoas and iliac muscles and the bones and ligaments of the hip joints. Apply the mnemonic MINT to these structures and the following list of possib
Calculations of the design of each unit operations
Flowrate
Present Average Flowrate = 4220 m3/d
Water use per capita = 4220/15000 = 0.281333 m3/d capita
Population after 10 years = 15000 Χ 1.0310 = 20158.75 ≒ 21000 capita
∴ Average Flowrate = 0.281333 Χ 21000 = 5908 m3/d ≅6000m3/d
Peak Flowrate = 5908 Χ 1.5 = 8862 m3/d ≅9000 m3/d
Screening
Conditions
Cle
Process Selection Considerations
Selection of an activated-sludge process for BOD removal and nitrification is a function of many considerations including specific site constraints, compatibility with the existing process, compatibility with existing equipment, present and future treatment needs, level of capability of the operating staff, capital costs, and operating cost.
Complete-mix activ